Pot-Mate 1981 to 1983 Original Bullet A simple way to add

A simple way to add an inexpensive aged look to your Fender instrument

This is how the Fender Lead I series is described - a single specially designed bridge position split humbucker (Seth Lover designed BUT not the same pickup dimensions as used in the Telecaster Deluxe easily noted by the three height adjustment screws)

the PBEV‑1 delivers tone you can trust night after night

5" fingerboard radius and a neck pocket with increased back-angle for improved stability and sustain

post height - 1 in

Pot-Mate 1981 to 1983 Original Bullet A simple way to addNoise often occurs as volume or tone pots are turned. Often contact cleaner can't rectify this problem. To eliminate this noise, your signal must be grounded from the shaft of the pot. Pot Mate will solve this problem. Directions for use 1) Remove knob from potentiometer shaft 2) Apply a small amount of Pot Mate in the gap between the shaft and potentiometer casing. A toothpick can be used to apply Pot Mate 3) Rotate shaft in both directions 2 or 3